|Productafmetingen||55.4 x 49.8 x 13.8 cm; 2.48 kg|
|Gegarandeerde software-updates tot||unknown|
Draper 06797 containerset voor kleine onderdelen 24-delig
Je aankoop verbeteren
|Afmetingen van item (L x B x H)||55.4 x 49.8 x 13.8 centimeter|
Over dit item
- Merk: Draper
Heb je een vraag?
Zoek naar een antwoord in productgegevens, veelgestelde vragen en recensies
Je vraag kan worden beantwoord door verkopers, fabrikanten of klanten die dit product hebben gekocht.
Controleer of u een geldige vraag hebt ingevoerd. U kunt uw vraag of bericht nog steeds bewerken.
Voer een vraag in.
Vaak samen gekocht
Eigenschappen: bestaande uit 24 plastic opbergboxen – afmetingen: 102 x 160 x 75 mm die op een robuuste kunststof montageplaat van 483 x 540 mm zijn bevestigd. Ideaal voor industriële omgevingen, zoals garages en werkplaatsen. Displaykarton.
Beste recensies uit andere landen
The professional ones are very expensive and I only need to store screws, nails, hooks etc so I bought this Stanley version which appeared as good as any of the cheaper DIY versions.
Out of the box the plastic caddies seemed a bit flimsy but once fixed to the back board they are actually fine unless you need them to hold heavy amounts of bolts etc
If you need to remove a caddy to look for something at the back of it then it is a bit fiddly and doing so regularly will probably snap the plastic so I am not mixing items in my caddies.
The caddies are just about stackable off of the backplate if you want to have some on the workbench.
There are plenty of holes to choose from to fix the backplate to your wall and the supplied screws and plugs to fix the backplate are adequate.
All in all I recommend this product.
I wanted an item where I could lift off the bin to see what was in it, for example if it contained a variety of small items that were not identical such as washers or other hardware.
The problem is the bins are extremely difficult to hook onto the board, especially once they are all in place. You have to push very hard on the top edge of the bin and the fit is really really tight. We had trouble putting one on in the first place and if it's not in the perfect position you can't slide it along. You wouldn't be able to push on the top of the bin if there was another above it.
If you wanted to take one off it's so tight that you'd end up with it flirting off suddenly and scattering it's contents everywhere. Terrible design unless you never intend taking them off again and have small enough hands to get to the back of them.
That being said they are useful for those of us with workshops, especially the engineers among us who love to organise and keep things correct. So here I am at the Draper set which I'm sure you could probably find with other 'brand names' elsewhere as it's inevitably a Chinese product knocked out to anyone who wants to sell it.
The ducets are a good size for everyday odds and sods such as screws and pipe fittings.They are also good quality with a sturdy feel to them that will last well.
The thing that I didn't twig when I ordered these was that the backing board is plastic and when I opened up the box my heart sank. Which was wrong because actually it's very strong and holds all of the bins securely without sagging even when full of bolts. It also has the advantage of not rusting if you have a damp shed or shop. The board does have holes enough to make Swiss cheese of you wall by time you have finished drilling the holes for plugs but as someone else noted you could put a bit of ply up first with four wall anchors.
Overall a well made and useful item as a bearable cost.
Mounted on a solid surface (wall or back board for sturdiness