Evolution Power Tools


zagen met slechts één zaagblad. De veelzijdige machines en de enorm robuuste zaagbladen maken indruk met hun prestaties.	Hout met spijkers.	Gekleurde metalen Alleen geschikt voor droog snijden.	staal. Snijden van staal zonder verhitting dankzij de unieke bladgeometrie.

Bouwzaag Evolution Rage 3 DB 255 mm

Snijdt staal, aluminium en hout. Met slechts één zaag en slechts één blad. Aan beide zijden kantelbaar (2 x 45°).

Rage 5 255 mm

Multifunctionele tafelzaag inclusief onderstel. Snijdt staal, aluminium en hout. Met slechts één zaag en slechts één blad.

Populaire accessoires:


Universeel cirkelzaagblad 255 mm Snijdt staal, aluminium, hout en kunststof.	Universeel cirkelzaagblad 210 mm Snijdt staal, aluminium, hout en kunststof.	Onderstel naar modellen Rage Inclusief: Verlengingsset. Maximale laadvermogen: 225 kg. Voor werkstukken tot 3000 mm	spaanverzamelaar. voor magneetboorstandaard Evo 42

Vertaal alle beoordelingen naar het Nederlands

Vragen en antwoorden voor klanten

Vragen en antwoorden bekijken

Klantenrecensies

5 sterren		79%
4 sterren		14%
3 sterren		4%
2 sterren		2%
1 ster		1%

Hoe klantenrecensies en -beoordelingen werken

Beste recensies uit andere landen

Craig Heath

Sturdy legs and frame, but wonky roller arm brackets

Beoordeeld in het Verenigd Koninkrijk op 21 juli 2018

Generally this is well constructed, solid and stable, but it is let down by the crude box section brackets that hold the roller extensions. One of the locking screw holes in one side on mine had a blob of weld in it so I had to retap the thread. The roller extensions just sit in square holes in the box sections (not in any kind of sleeve) so there is quite a bit of slop, but even if you pull the rollers in the right direction before you tighten the locking screws they won't go completely level - one side tilts forwards and the other tilts back. I think I'm going to need to do some filing on one edge of the square holes and duct tape on the opposite edge to get everything level. Still, it is a lot cheaper than the De Walt equivalent so I can't complain too much!

29 mensen vonden dit nuttig

Peter Johnson

Could have been good.

Beoordeeld in het Verenigd Koninkrijk op 10 maart 2020

Unfortunately the good features of this table - the sturdy legs and rails - are let down by the flimsy and useless adjustment mechanisms.

The two vertically sliding rollers are held in place by friction knobs, but the housings these screw into are so flimsy, I cannot imagine how anyone could have thought that could work.

These failings render what could have been important features of this device utterly useless. These can no doubt be fettled to be of some purpose, but why bother making such shoddy crap in the first place other than to save a couple of pounds?

The locking "buttons" for the legs do work OK but are a bit of a faff to use. Like the Evolution chop saw I bought along with the table, poor implementation of details lets down the product rather drastically.

12 mensen vonden dit nuttig

Amazon Customer

It's one of them "how did I go for so long without this?", things.

Beoordeeld in het Verenigd Koninkrijk op 6 mei 2019

If you don't have one of these to go with your mitre saw you are being silly. You'll understand this when you buy one for yourself.

For years I went without a stand thinking it would be more hassle than benefit. But getting your saw off the floor where you'd have to kneel down for it and having support arms to keep the cutting material level honestly makes every difference.

This model is universal. I use it for a makita saw and everything lines up with the adjustable fittings. I also used it with a Hitachi before.

You look a little clumsy putting the first leg down when setting up and then bringing the last leg in when putting away but overall it's easy to use and stores away nicely. Everything tightens and loosens with finger turn adjustments which means no tools required.

It is a well priced builders must have.

14 mensen vonden dit nuttig

Frank

Well made and sturdy

Beoordeeld in het Verenigd Koninkrijk op 26 december 2017

This is a very good value mitre saw stand,

I purchased it along with an evolution rage3 255mm sliding mitre saw,

To put together is very straightforward and it feels very sturdy when fully built.

If I was to make two criticisms it is that it could be a bit taller, Im just under six foot tall and found that I had to stoop a little when making the cuts and there is no height adjustment on the legs, this also makes levelling the stand a little tricky as you need to get it on a level surface rather than just use adjusters to level it.

However if you are like me a home DIYER then i would still recommend this stand, if however your in the trade than a stand with more adjustment will probably be a better choice

22 mensen vonden dit nuttig

DIY Daddy

Excellent value for money stand

Beoordeeld in het Verenigd Koninkrijk op 29 augustus 2019

Excellent value for money. Super sturdy stand. Perfect for a 21cm mitre and medium weight and size pieces. Almost spend 3 times as much on a dewalt stand - which I see people complaining about the rollers and brackets in any case

14 mensen vonden dit nuttig